Unternehmensnachrichten über LED Application Scenarios: 2x5x7mm Rectangular Through Hole LED for Panels, Power Strips & Appliances

The 2×5×7mm rectangular through-hole LED is one of the quiet heroes of modern product design — a 0.06W indicator lamp that hides behind a slim panel window yet throws a bright, evenly diffused rectangle of light. For buyers sourcing status indicators in volume, the BOSMFC 2*5*7mm through hole LED gives seven colors, an 80–160° viewing angle and a 60,000-hour rating from a single footprint.

Why the Rectangular 2×5×7mm Format Wins in Panel Design

A round 3mm or 5mm lamp leaves a circular hot spot behind an injection-moulded window. The rectangular body solves that geometry problem directly: the emitting face matches the shape of the indicator window, so the lit area looks intentional instead of accidental.

• Rectangular emitting face — fills panel cut-outs edge to edge with no hot spot or dark corner.
• Wide 80–160° beam — comfortable viewing from steep angles on wall-mounted equipment.
• Low 0.06W drive — 20mA at 1.8–3.6V, easy to run from 5V, 12V or 24V rails.
• Two-lead through-hole mounting — hand or wave soldering, no reflow profile needed.
• San'an / Epistar chips — consistent brightness bins across production lots.

Seven Light Colors From One Footprint

Instead of stocking seven part numbers, panel makers can standardise on one housing and switch the bin. The table below shows the measured range of the platform at IF=20mA, Ta=25°C.

Five Application Scenarios That Fit This Part

Design Notes: Current Limiting at a Glance

Each lamp needs only one series resistor. The values below keep the part at 20mA on the three rails most common in panel electronics.

Mounting tip: keep the 0.3–1mm air gap between lamp face and panel window below 2mm and add a matte diffuser film if the customer requires a perfectly flat glow.

Quality and Supply Behind the Part

The lamp is produced by Dongguan Lanjin Optoelectronics Co., Ltd. (东莞市蓝晋光电有限公司), an LED manufacturer established in 2005 with a 2,500m² anti-static, constant-temperature workshop in Dongguan, China. The factory is ISO9001:2015 certified, holds 2 national invention patents and 12 utility-model patents, and ships all parts RoHS and Reach compliant. Capacity reaches 550KK units per month, with MOQ from 1,000pcs, 5–15 day lead times and a 3-year warranty; the same production line also covers round, oval, straw-hat, flat-top, square, bullet and concave through-hole lamps for buyers who want one supplier for a full indicator range.

Specification Summary

• Model: BOSMFC 2*5*7mm through hole LED (rectangular 2×5×7mm)
• Ratings: 0.06W, 20mA, VF 1.8–2.4V (warm colors) / 2.8–3.6V (green, blue, white)
• Optics: 80–160° viewing angle, up to 7,000mcd in white
• Life & environment: 60,000 hours, −40…+85°C operating, −40…+100°C storage
• Packing: 1,000pcs per anti-static bag, export carton outside

If your next panel needs a crisp rectangular indicator that solders like a classic lamp and specs like a modern chip, Dongguan Lanjin Optoelectronics Co., Ltd. can quote the 2×5×7mm platform, supply free color samples and match your brightness bin within one working day.